Sugar Cutters

© Copyright 2010. Do not copy. All rights reserved and enforced.

Sugar used to come in loaves and cones. Some cones might be 2 feet (60 cm) tall, tapering from 9 inches (23 cm) at the base to 4 inches (10 cm) at the top.

Sugar Cutters were used for breaking it up into "lumps" or pieces.

There were two general types. One for use by grocers, and another type for home use.

Sugar Cutters for grocers were made of cast iron, and mounted on a base with a handle. You pulled the handle down, which raised the other end off the base. You then put the sugar in, and pushed the handle back up. In this way, the grocer would break large cones of sugar into smaller pieces for sale to customers.

Ones for home use were more like tongs, except that at the "tong" end, instead of blunt edges, they had sharp edges pointing into each other for cutting into whatever was in between.

They tongs could be used at the table or in the kitchen to make the pieces from the grocer even smaller. To crush the sugar at home, a mortar and pestle could be used.

Home ones sometimes referred to as "sugar nippers."


History Notes for Sugar Cutters

Sugar Cutters were made starting in the 1800s.


They started disappearing with the commercial advent of granulated sugar in the UK in 1867 , and cube sugar in 1880.

They are now considered very collectible.

Bookmark and Share